Water truck pump CTH-20
  • Water truck pump CTH-20
  • Water truck pump CTH-20

Water truck pump CTH-20



Excl. taxes / Delivery cost on inquiry

Product model: Hydraulic water pump CTH-20
Make an order / ask a question
Model CTH-20
Type Self-priming
Max.flow 600 l/min
Suction / discharge diameter 50 mm
Total head 30 m
Suction lift 8 m
Motor Hydraulic VIVOLO
Displacement 9 cc
Max.oil flow Depends on the power of the hydro motor
Pump body Plastic
Impeller Plastic
Mechanical seal Carbon ceramic
Weight 15 kg

The pump is designed for:

• tank filling.

• to dissolve fertilizer by stirring.

• filling or watering the sprayer.


Only one hose is used for both filling and emptying.

For the tank are not needed additionals valves.

Very compact design.

The pump can be installed wherever convenient: at the front or rear of the tank.

The pump can be started and controlled right on the pump.

The pump housing and impeller are made of strong plastic - fiberglass, and are completely resistant to aggressive liquids.

Chemical & sea water pumps are great for pumping chemical liquid and are used on vessels to remove seawater. The pump housing, pump cover, impeller, and diffusor are all PA66 plastic materials.

Speed regulator

The speed regulator allows the user to have direct control of the speed of rotation of the motor shaft. It is useful in several cases, particularly when the speed must be constant, regardless of the flow rate. 

Electric bypass valve

The electric bypass valve is used to divert the flow of oil from the inlet directly to the engine exhaust. The valve is activated by an external electrical signal. It is normally used in water pumps.

Application: for water truck.